|HIGH QUALITY SEIKO
- Unsurpassed quality
- No extra charge for hanger
- Pricing includes hour, minute and sweep hands.
Specify sawtooth or regular hanger.
- Quartz Accuracy
Stabilized quartz crystal assures high accuracy to within + 15 seconds per month.
The solid brass shaft enables secure fastening of the movement to the dial; consequently, the finish clock is more shock resistant.
A minimum number of parts (17 in the entire movement) reduces wear within the movement and assures trouble-free operation. The movement is completely enclosed in it's case, so dust and dirt cannot get into the movement.
- Compact Size
The movement is approximately 2 1/8" x 2 1/8" x 1/2"
- Battery Life
The movement runs approximately 2 years
On a fresh "AA" battery.
- Step Second Motion
The second hand, if used, moves in exact one second steps.
CHOOSING THE CORRECT SHAFT LENGTH
Selecting the proper shaft length is important to ensure sufficient clearance when going through your dial board, and when using a glass front on your clock. Overall length (A) is measured from the tip of the hand shaft to the movement case. Allow an extra 1/8" for a cap nut or sweep second hand. The threaded part of the shaft (B) secures your movement to the dial plate or wood. Measure the thicness of the material which the shaft must go through. Allow an extra 1/8" for mounting hardware.